[Step-by-Step Guide] How to Connect Two Bluetooth Speakers to iPhone

How to Connect Two Bluetooth Speakers to iPhone

If you have been using bluetooth speakers to listening to music or for video conferencing purposes then you might be aware that it is tough to connect two bluetooth speakers to a single iPhone.

However, you don’t need to worry as we are going to show you exactly how to connect two bluetooth speakers to iPhone in this article.

We all know that connecting multiple bluetooth speakers to an iPhone can be the best setup you can get to a home theatre setup as well because of the surround sound effect.

There is already a bit of chatter in various forums about how to do this properly but we are going to show you the exact process down below.

But you also need to know that there are some thing you need to connect two or more bluetooth speakers to an iPhone.

It is best to have the bluetooth speakers you are trying to connect be of the same brand such as two Google Home speakers or two Apple HomePod speakers.

Because it is obvious that bluetooth speakers from different brands tend to be different and their ways of connection are different as well.

To connect multiple bluetooth speakers to a single iPhone, you need the following:

  • An iPhone running on iOS 6 or higher.
  • Two or more Bluetooth speakers with built-in audio cable ports and third-party app support.
  • Wireless router for all paired devices to communicate with each other.

How to Connect Two Bluetooth Speakers to an iPhone

To establish a Bluetooth connection on multiple devices, you need to perform the following steps:

Step 1: On the iPhone, go to Settings > Bluetooth.

Step 2: Turn on both speakers.

Step 3: Connect the speakers from Bluetooth Settings.

Step 4: If there are more than two speakers, repeat step 2 and 3 which are to turn on the speakers and connecting them from Bluetooth Settings.

Step 5: Once you are done with your connection, you can switch back to Single Speaker mode from Multi-speaker mode.

Step 6: You can adjust volume after connecting multiple speakers by going to Settings > Music and selecting Volume Limit.

Here is how you can connect multiple speakers to your iPhone with the help of Bluetooth connection. Basically, all you need to do is pair all the devices with each other and then play your music over them.

Things to keep in mind when connecting multiple speakers to iPhone

There are a few things you need to keep in mind when you are connecting two or more bluetooth speakers on a single device such as the iPhone.

#1. Using Bluetooth

If you are using Bluetooth to connect multiple speakers to an iPhone then you need to make sure that both of them are running the latest version of Bluetooth.

This is because if one of them is running an older version of Bluetooth then it can cause problems in communication.

#2. Direct Connection

It is also possible to have a direct connection between the iPhone and two bluetooth speakers because you can use an audio jack splitter which will use the same port but give you multiple ports as output.

You can connect multiple speakers to those ports and all will be connected to the same iPhone and play music as well.

#3. Connect through Wireless router

If you have a wireless router available and can connect your bluetooth speakers via them then it can be the best thing.

Since Bluetooth has limited range and wired connection obviously isn’t flexible, connecting via wireless router gives you both range and flexibility.

#4. Select Speakers in iTunes

If you have already set up your speakers in your iTunes library then you just have to select ‘Group‘ next to the song you are playing so that it plays on all of the speakers.

If only one speakers shows up them remove it by using the ‘‘ button and don’t select anything other than stereo as a group setting for the best experience.

#5. Connect Speakers via AirPlay

Once everything is setup, you can play songs via them and test if everything is working properly or not.

Don’t play any songs by selecting only one speaker as you will not get a surround sound experience if you do that.

Conclusion

Well, that is basically all there is to connecting two bluetooth speakers to iPhone at the same time.

You can connect them via bluetooth, audio cables or even via your wireless router as well but we think the bluetooth option is the most convenient one.

However, if you don’t have wireless speakers then the next best is to go for non-wireless connection using cables.

Make sure to follow this step-by-step guide properly and if you feel stuck at any point then make sure to comment your problem down below and we will help you fix the issue.

Abhishek

Abhishek Jariwala is the Founder, Owner, and also Chief Editor at TheAndroidLab and he looks after all the daily stuff that takes place here. If you have any queries related to this site, you can contact him via email at [email protected] or on his Twitter handle.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Recent Posts